| 翻訳と辞書 |
| Automatic test pattern generation ： ウィキペディア英語版 |
Automatic test pattern generation
ATPG (acronym for both Automatic Test Pattern Generation and Automatic Test Pattern Generator) is an electronic design automation method/technology used to find an input (or test) sequence that, when applied to a digital circuit, enables automatic test equipment to distinguish between the correct circuit behavior and the faulty circuit behavior caused by defects. The generated patterns are used to test semiconductor devices after manufacture, and in some cases to assist with determining the cause of failure (failure analysis.) The effectiveness of ATPG is measured by the amount of modeled defects, or fault models, that are detected and the number of generated patterns. These metrics generally indicate test quality (higher with more fault detections) and test application time (higher with more patterns). ATPG efficiency is another important consideration. It is influenced by the fault model under consideration, the type of circuit under test (full scan, synchronous sequential, or asynchronous sequential), the level of abstraction used to represent the circuit under test (gate, register-transfer, switch), and the required test quality.
== Basics of ATPG ==
A defect is an error caused in a device during the manufacturing process. A fault model is a mathematical description of how a defect alters design behavior. The logic values observed at the device's primary outputs, while applying a test pattern to some device under test (DUT), are called the output of that test pattern. The output of a test pattern, when testing a fault-free device that works exactly as designed, is called the expected output of that test pattern. A fault is said to be ''detected'' by a test pattern if the output of that test pattern, when testing a device that has only that one fault, is different than the expected output. The ATPG process for a targeted fault consists of two phases: ''fault activation'' and ''fault propagation''. Fault activation establishes a signal value at the fault model site that is opposite of the value produced by the fault model. Fault propagation moves the resulting signal value, or fault effect, forward by sensitizing a path from the fault site to a primary output.
ATPG can fail to find a test for a particular fault in at least two cases. First, the fault may be intrinsically undetectable, such that no patterns exist that can detect that particular fault. The classic example of this is a redundant circuit, designed so that no single fault causes the output to change. In such a circuit, any single fault will be inherently undetectable.
Second, it is possible that a pattern(s) exist, but the algorithm cannot find it. Since the ATPG problem is NP-complete (by reduction from the Boolean satisfiability problem) there will be cases where patterns exist, but ATPG gives up since it will take an incredibly long time to find them (assuming P≠NP, of course).
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Automatic test pattern generation」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|